2 / 3 Port Valves for General Purpose

[For High-Pressure Water] Pilot Operated 2-Port Solenoid Valve JSXH-X2 Can be used at up to 10 MPa. For high-pressure washing, water spraying, and misting An IP67 structure with improved environmental resistance  (The DIN terminal is IP65.) Orifice diameter [mmø]: 12 Flow rate characteristics [Kv]: 1.7 (Port size 3/8), 1.9 (Port size 1/2) Easy maintenance. The coil can be replaced by simply removing the clip. Power consumption: 8 W

・Carries fluid such as solvent with a soft and abrasion resistant tube. ・2-layer structure 　Outer layer: Special nylon resin 　Inner layer: Special fluoropolymer ・Internal smoothness: Equivalent to Ra 0.02 μm Series Tubing O.D. Metric size Color Fluid TQ ø4, ø6, ø8, ø10, ø12 Translucent (Material color) Air, Water, Inert gas, Solvent

・Since sealing tape is not required, there is no concern of insulation. 　(Applicable for painting with high voltage) ・Easy attachment/removal of piping in narrow spaces Series Material/Description Port size VCK Stainless steel fitting (316L SS) G1/4

・Applicable for 2 liquid paint (VCC12D) 　PTFE diaphragm structure = Sliding part eliminated 　Less paint adhesion ・Mountable on a robot arm (Space-saving, lightweight) 　2 valves per station (30 mm pitch) 　2/3 port valves mixed 　Resin manifold block Series Orifice diameter Fluid VCC ø3.8 Water/chemical base paint, Ink, Cleaning fluid (Water, butyl acetate), Air

・For steam control ・Adopting PTFE seals ・With indicator light (option) ・Air operated type Series Actuation Port size Orifice diameter (mmø) VND N.C./N.O. 1/8 to 2 1 1/4B to 2B 7 to 50

・For controlling coolants (cutting fluid) used in machine tools. ・Maximum operating pressure: 3.5 MPa, 7 MPa ・Air operated, external pilot solenoid Series Actuation Port size Orifice diameter (mmø) VNH N.C. 3/8 to 1 3.9 to 15.7

・For controlling coolants (cutting fluid) used in machine tools. ・Maximum operating pressure: 0.5 MPa, 1 MPa ・Air operated, external pilot solenoid Series Actuation Port size Orifice diameter (mmø) VNC N.C./N.O. 1/8 to 2 1 1/4B to 3B 7 to 80

・For controlling various fluids・Can operate with a wide range of fluids, such as air, water, oil, gas,　vacuum, etc., by selecting the body and seal materials.・Air operated, external pilot solenoidSeriesActuationPort sizeOrifice diameter (mmø)VNBN.C./N.O./C.O.1/8 to 21 1/4B to 2B7 to 50

・Exclusively for pneumatic system and air-hydro circuit control. ・The balance poppet permits normal and reverse flow. ・Air operated, external pilot solenoid Series Actuation Port size Orifice diameter (mmø) VNA N.C./N.O./C.O. 1/8 to 2 10 to 50

・High flow type. Maximum operating pressure: 3 MPa, 7 MPa, 10 MPa [New]、14MPa [New] ・Corresponding to high speed grinding and long drilling processes ・Coolant valve for high pressure coolant liquid that is ideal for lubrication, 　dust blowing and cooling. ・Low power consumption: 0.35 W (at 24 VDC) ・Service life: 3 million cycles or more (Based on SMC's test condition) ・CE-compliant 　Water hammer: Reduced by 20% ・Compatible with G thread (ISO1179-1) as standard. ・Air operated, external pilot solenoid   Series Actuation Port size Orifice diameter (mmø) SGH N.C./N.O. 3/8 to 1 9 to 25

・High flow type to control coolants (cutting fluid) in machine tools.・Low power consumption: 0.35 W (at 24 VDC)・Maximum operating pressure: 0.5 MPa, 1 MPa, 1.6 MPa・Service life: 5 million cycles or more (Based on SMC's test condition)・CE-compliant.・Compatible with G thread (ISO1179-1) as standard.・Air operated, external pilot solenoidSeriesActuationPort sizeOrifice diameter (mmø)SGCN.C./N.O.3/8 to 29 to 51