Controllers and Drivers

AC Servo Motor Driver Network Card Type LECSN-T Series Supports 3 types of the network card (PROFINET, EtherCAT, and EtherNet/IP™) STO (Safe Torque Off) safety function available Control encoder: Absolute 22-bit encoder (Resolution: 4194304 p/rev)

Step Motor Controller JXC Series  Parallel I/O Step motor (Servo/24 VDC) Number of step data: 64 points

Jog operation can be performed using parallel input signals. Jog operation that could previously only be performed using the button on the front face can now be performed using the ON/OFF status of the input signal. Application Examples Optimal for adjusting the feed value using a button operation while checking the motion of the actuator

Neither a PC nor a teaching box is required for adjusting the position of step data. With a JOG function for parallel input signals Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Number of step data Step data input type LECP6-XB120 Step motor (Servo/24 VDC) 24 VDC ±10% 11(Photo-coupler isolation) 13 (Photo-coupler isolation) 64 points

・EtherNet/IPTM added [New] ・4 axis synchronous control ・Linear/circular interpolation ・Positioning/pushing operation ・Absolute/relative position coordinates instructions ・Step data input (Max. 2048 points) ・Space saving, Reduced wiring Type Series I/O type Compatible motor Power supply voltage Number of axes Step data input type JXC73 NPN Step motor (Servo/24 VDC) 24 VDC ±10% Max. 4 axes Step data input type JXC83 PNP Step motor (Servo/24 VDC) 24 VDC ±10% Max. 4 axes Step data input type JXC92 EtherNet/IP™ Step motor (Servo/24 VDC) 24 VDC ±10% Max. 3 axes Step data input type JXC93 EtherNet/IP™ Step motor (Servo/24 VDC) 24 VDC ±10% Max. 4 axes

・EtherCAT™, EtherNet/IP™, PROFINET compatible, DeviceNet™ ・Two types of operation command 　Step no. defining operation, Numerical data defining operation ・Transition wiring of communication cable ・Numerical monitoring available Series Compatible Motor Power Supply Voltage Fieldbus JXCE1 Step motor (Servo/24 VDC) 24 VDC ±10% EtherCAT™ JXC91 Step motor (Servo/24 VDC) 24 VDC ±10% EtherNet/IP™ JXCD1 Step motor (Servo/24 VDC) 24 VDC ±10% DeviceNet™ JXCP1 Step motor (Servo/24 VDC) 24 VDC ±10% PROFINET  

・Pulse input type motor driver ・Compatible motor capacity: 100 W, 200 W, 400 W ・Compatible encoder: 　Incremental type 　Absolute type ・Servo adjustment using auto gain tuning ・With display setting function Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Pulse input type (For incremental encoder) LECSA AC servo motor (100/200/400 W) 100 to 120 VAC (50/60 Hz) 200 to 230 VAC (50/60 Hz) 6 4 Pulse input type (For absolute encoder) LECSB AC servo motor (100/200/400 W) 100 to 120 VAC (50/60 Hz) 200 to 230 VAC (50/60 Hz) 10 6 CC-Link direct input type (For absolute encoder LECSC AC servo motor (100/200/400 W) 100 to 120 VAC (50/60 Hz) 200 to 230 VAC (50/60 Hz) ― ― SSCNETⅢ type (For absolute encoder) LECSS AC servo motor (100/200/400 W) 100 to 120 VAC (50/60 Hz) 200 to 230 VAC (50/60 Hz) ― ― SSCNETⅢ/H type (For absolute encoder) LECSS-T AC servo motor (100/200/400 W) 200 to 240 VAC (50/60 Hz) ― ―

・The LE series electric actuators are applicable to Fieldbus protocols. ・Conversion unit for Fieldbus network and LEC serial communication ・Two methods of operation 　Step data input, numerical data input ・Position, speed, etc. values can be checked on the PLC. Series Applicable Fieldbus Power supply voltage Applicable controllers LEC-G CC-Link DeviceNet™ PROFIBUS DP EtherNet/IP™ 24 VDC ±10% Series LECP6 Series LECA6

・EtherNet/IP™ compatible ・10/100 Mbps high-speed communication ・Dual port connection 　Transition wiring of communication cable ・Recovery is possible during a disconnection of the device level ring (DLR)! Type Series Compatible motor Power supply voltage Fieldbus EtherNet/IP™ Direct input type JXC91 Step motor (Servo/24 VDC) 24 VDC ±10% EtherNet/IP™

・CC-Link Ver. 1.10 compatible ・External data import function ・Position and speed can be monitored by the PLC ・Step data can be edited from the PLC touch panel (display). Type Series Compatible motor Power supply voltage Field bus CC-Link direct input type LECPMJ Step motor (Servo/24 VDC) 24 VDC ±10% CC-Link Ver.1.10

・A driver that uses pulse signals to allow positioning at any position. 　The actuator can be controlled from the customers' positioning unit. ・Return-to-origin command signal ・With force limit function (Pushing force/Gripping force operation 　available) Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Number of step data Pulse input type LECPA Step motor (Servo/24 VDC) 24 VDC ±10% 5 (Photo-coupler isolation) 9 (Photo-coupler isolation) ―

・No programming 　Capable of setting up an electric actuator operation 　without using a PC or teaching box ・Speed/acceleration 16-level adjustment ・Compatible with actuators with locks ・Setting 3-level pushing force Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Number of step data Programless type (With stroke study) LECP2 Step motor (Servo/24 VDC) 24 VDC ±10% 6 (Photo-coupler isolation) 6 (Photo-coupler isolation) 2 stroke end points 12 intermediate points

・No programming 　Capable of setting up an electric actuator operation 　without using a PC or teaching box ・Speed/acceleration 16-level adjustment ・Compatible with actuators with locks ・Setting 3-level pushing force Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Number of step data Programless type LECP1 Step motor (Servo/24 VDC) 24 VDC ±10% 6 (Photo-coupler isolation) 6 (Photo-coupler isolation) 14 points

・The controller is already set with the data of the actuator. 　(The actuator and controller are sold as a package.) ・Easy operation and simple setting: Easy mode, Detail setting: Normal mode ・Teaching box, controller setting software Type Series Compatible motor Power supply voltage Parallel input/output Input Parallel input/output Output Number of step data Step data input type LECP6 Step motor (Servo/24 VDC) 24 VDC ±10% 11 (Photo-coupler isolation) 13 (Photo-coupler isolation) 64 points Step data input type LECA6 Servo motor (24 VDC) 24 VDC ±10% 11 (Photo-coupler isolation) 13 (Photo-coupler isolation) 64 points