Flow Control Equipments

Improved environmental resistance with the all stainless steel exterior.Possible for use in environments such as high temperature, water splashing, and where copper and zinc cannot be used Max. operating temperature: 150°C NSF H1 grease Connection thread: Supports M5, R, and G Material: Stainless steel 316 (Body A), FKM (Seal material) * Stainless steel 304 is used as the material for parts other than body A. Compact: Height reduced by 23％, Lightweight: 21 g ← 42 g

High Pressure Coolant Check Valve AK-DPY00025/26 Max. operating pressure: 15 MPa Compact and lightweight: Weight 130 g (Rc3/8), 210 g (Rc1/2) Structure that prevents foreign matter from piling up around the main valve Laser-welded connection prevents looseness

Flat Head Screwdriver Adjustable Metal Speed Controller with One-touch Fitting ASB-D Series Improved environmental resistance with the all metal exterior Flow adjustable by a flat head screwdriver Prevents accidental manual operation Adjustment needle lock nut feature as standard Prevents unauthorized adjustment and unwanted operation of the needle from the set position due to vibrations or impacts. Helps improve safety in your machinery More compact: Height reduced by 28% (For G thread, face seal)

Metal Speed Controller with One-touch Fitting ASB Series Improved environmental resistance with the all metal exterior For use in environments with welding spatter, dust, ultraviolet, etc. Improved installability.More space beneath the tube. Easier installation/removal of the tube Lightweight: Approx. 28% reduction (54g → 39g)

Speed Controller with One-touch Fittings AS-FM/FC Series AS-FSM/FSC Series Finer adjustment and greater accuracy of actuator speed is available within the specified control range. 1 to 50 mm/s: AS-FM Series 50 to 150 mm/s: AS-FC Series

Product Features ■ Knob material changed from resin to metal ■ Applicable tubing O.D.: ø4, ø6, ø8, ø10, ø12 ■ Related Product

Uses flame-resistant resin (Equivalent to UL-94 Standard V-0) Applicable tubing O.D.: ø6, ø8, ø10

Height 12.7mm, Height: 9.7mm shorter (43.3% reduction) Possible to adjust flow rate even in a narrow space Easily mounted using a hexagon wrench Minimum operating pressure: 0.05 MPa Easy to use Push-lock type Easier and consistent flow setting Type Series Port size in the cylinder side Applicable tubing O.D. Metric size Applicable tubing O.D. Inch size Elbow type JAS; M3×0.5 M5×0.8 10-32UNF φ3.2 to φ4 to φ6 φ1/8'' to φ5/32'' to φ1/4''

“Made to Order”section has been added Reduces labor time Easy to use Push-lock type Knob O.D.: Almost doubled Improved reproducibility of flow rate Lightweight: Weight/Approx. 27% lighter Electroless nickel plating type is standardized. Stainless steel type is standardized.

Easy to lock with push-lock type Larger handle Improved tube insertion/removal Insertion force: Max. 30% (8 N) reduction           Removal force: Max. 20% (5 N) reduction＊          ＊Tube pulling out strength is ensured to be equivalent to existing model. Electroless nickel plated type is standard. 360°swivel piping possible (universal type)

・Contributes to the "reduction of work-hours" and "reduction of setting errors" by 　controlling the flow rate value.　The value can be controlled with the indicator window.TypeSeriesPort size in the cylinder sideApplicable tubing O.D.Metric sizeApplicable tubing O.D.Inch sizeElbow typeAS12□1FS to 42□1FSM5×0.810-32UNFR, NPT, G 1/8 to 1/2 φ2 to φ16φ1/8'' to 1/2''Universal typeAS13□1FS to 43□1FSM5×0.810-32UNFR, NPT, G 1/8 to 1/2φ3.2 to φ12φ1/8'' to 1/2''Elbow typeStainless steel typeAS12□1FSG to 42□1FSGM5×0.810-32UNFR,NPT,G 1/8 to 1/2φ2 to φ16φ1/8'' to 1/2''Universal typeStainless steel typeAS13□1FSG to 43□1FSGM5×0.810-32UNFR, NPT, G 1/8 to 1/2φ3.2 to φ12φ1/8'' to 1/2'' Elbow typeUni threedAS22□1FS to 42□1FSUni 1/8 to 1/2φ3.2 to φ16φ1/8'' to 1/2''

・A holder for securing a speed controller (In-line type) with One-touch fittings. ・Universal mounting. Type Series Holder TMH

・Residual pressure in the cylinder can be easily released with one push of button.TypeSeriesApplicable tubing O.D.With One-touch fittings without a push button guardKEAφ6 to φ12With One-touch fittings with a push button guardKEBφ6 to φ12Rc thread with a push button guardKECConnection thread：Rc1/4，3/8

・40% reduction in air consumption.・Cuts air consumption by operating the return stroke at a reduced　pressure.TypeSeriesPort sizeApplicable tubing O.D.Pressure valveASR1/4 to 1/2φ6 to φ12Flow valveASQ1/4 to 1/2φ6 to φ12

・Prevents accidents caused by sudden cylinder rod extensions.TypeSeriesPort sizeMeter-out controlASS100 to ASS6001/8 to 1Meter-in controlASS110 to ASS3101/8 to 3/8

・Improve durability in high-pressure environments by using a polyurethane　elastomer poppet.TypeSeriesPort sizeOperating pressure5.0 MPaVCHC403/4，10.05 to 5.0MPa

- Body Material: Brass, Stainless Steel - Rubber Material: NBR, FKM, CR Type Series Port size Applicable tubing O.D. Metric size Applicable tubing O.D. Inch size In-line type AK2000/AK4000 AK6000 1/8 to 1 - - Straight type AKH - φ4 to φ12 φ5/32'' to φ1/2'' Male connector type AKH M5 to 1/2 φ4 to φ12 φ5/32'' to φ1/2'' Bushing type AKB 1/8 to 1/2 - - Made to Order for air/water ・Body material: Brass, Stainless steel ・Rubber material: NBR, FKM, CR ・High temperature, low temperature ・Low cracking 1/8 to 1/2 - -

・Integrates a quick exhaust valve and an exhaust throttle valve.・Supports the high speed operation of cylinders.TypeSeriesPort sizeSpeed exhaust controllerASV120F/220FM3,M5Speed exhaust controllerASV310F/410F/510F1/8 to 1/2

・A wide selection of models. Type Series Port size Applicable tubing O.D. Lip AQ1500/ AQ1510 M5・1/8 - Diaphragm AQ2000 to AQ5000 1/8 to 3/4 - Built-in One-touch fittings AQ240F/ AQ340F - φ4 to φ6，φ1/4''

・Superior sound reducing performance (Over 20 dB at max. flow rate)・Can be directly mounted on the exhaust port of the solenoid valve.TypeSeriesPort sizeMetering valve with silencerASN2M5 to 1/2

・Pilot check valve and speed controller are combined. ・Realizes momentary intermediate stoppage of a cylinder and is able 　to adjust its speed control. Type Series Port size in the cylinder side Applicable tubing O.D. Metric size Applicable tubing O.D. Inch size Speed controller with pilot check valve ASP 1/8 to 1/2 φ6 to φ12 φ1/4'' to φ1/2''

・Able to adjust flow by a special tool.・Prevention of an unnecessary manual operation.TypeSeriesPort size in the cylinder sideApplicable tubing O.D.Metric sizeApplicable tubing O.D.Inch sizeWith One-touch fittingsElbow/Universal typeAS□□□1F-TM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''With One-touch fittingsIn-line typeAS□□□1F-T−φ3.2 to φ12φ1/8'' to φ1/2''With One-touch fittingsDual speed controllerASD□□□F-TM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''Metal bodyAS□2□0-TM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''

・Flow adjustable by flat head screwdriver.・Prevention of an unnecessary manual operation.TypeSeriesPort size in the cylinder sideApplicable tubing O.D.Metric sizeApplicable tubing O.D.Inch sizeWith One-touch fittingsElbow/Universal typeAS□□□1F-DM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''With One-touch fittingsIn-line typeAS□□□1F-D−φ3.2 to φ12φ1/8'' to φ1/2''With One-touch fittingsDual speed controllerASD□□□F-DM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''Metal bodyAS□2□0-DM5 to 1/2φ3.2 to φ12φ1/8'' to φ1/2''

・Ideal for low-speed control (from 10 to 50 mm/sec)・Number of needle rotations: 10 turnsTypeSeriesPort size in the cylinder sideApplicable tubing O.D.Metric sizeApplicable tubing O.D.Inch sizeWith One-touch fittingsElbow/Universal typeAS□□□1FMM5 to 1/4φ3.2 to φ10φ1/8'' to φ3/8''With One-touch fittingsIn-line typeAS□001FM−φ3.2 to φ10φ1/8'' to φ3/8''With One-touch fittingsDual speed controllerASD□30FMM5 to 1/4φ3.2 to φ10φ1/8'' to φ3/8''Standard type (Metal body)AS□□□0MM5 to 1/4φ3.2 to φ10φ1/8'' to φ3/8''