Rodless Cylinders

Basic type Magnetically Coupled Rodless Cylinder  Improved bearing performance Improved lubrication by using a Lub-retainer Reduction of sliding resistance Lightweight Fluid - Air Max. operating pressure - 0.7 MPa Cushion - Rubber bumper Lubrication - Not required

Basic Type Mechanically Jointed Rodless Cylinder Can be combined with a variety of guides to accommodate conditions. Simple design without guide facilitates space savings. Wide variations from ø10 to ø100 Minimizing the unit size (dimensions) and combination with other guides is possible Fluid - Air Action - Double Acting Operation pressure range - 0.1 to 0.8 Mpa Cushion - Rubber Bumper (10 mm bore size), Air Cushion Lubrication - Not required

・Low particle generation transfer in clean environmentsTypeSeriesActionBore size (mm)StandardCYPDouble acting15，32

・Low profile, short body, lightweight・The cylinder and guide are integrated.TypeSeriesActionBore size (mm)StandardCY1FDouble acting10，15，25

・Magnetically coupled, space-saving cylinder permits a wide range of　applications.TypeSeriesActionBore size (mm)Slider（Ball bushing bearing）CY1LDouble acting6，10，15，20，25，32，40Linear guideCY1HDouble acting10，15，20，25Linear guideCY1HTDouble acting25，32

・Weight: Max. 15% reduced (0.96 kg: Existing model 1.13 kg)・Overall length: Max. 15 mm shortened (240 mm: Existing model 255 mm)・Improved durability　Lub-retainers are mounted on the internal and external surfaces of　the cylinder tube to maintain the lubrication.・Adjustment bolt improves stroke accuracy/repeatability.TypeSeriesActionBore size (mm)Slider（Slide bearing）CY1S-ZDouble acting6，10，15，20，25，32，40

・Further improvement on Series CY1・Same mounting dimensions as those of Series CY1. Upgraded　bearing performance and reduction of sliding resistance.・NPT thread and G thread as standardTypeSeriesActionBore size (mm)BasicCY3BDouble acting6，10，15，20，25，32，40，50，63Direct mountCY3RDouble acting6，10，15，20，25，32，40，50，63

・This space-saving cylinder reduces the height by maximum of 36%　and length by maximum of 140 mm compared to the mechanically　jointed rodless cylinder, series MY1B.TypeSeriesActionBore size (mm)Basic, Short（Rubber bumper）MY3ADouble acting16，20，25，32，40，50，63Basic, Standard（Air cushion）MY3BDouble acting16，20，25，32，40，50，63Slide bearing guide（Air cushion）MY3MDouble acting16，25，40，63

・Reduces the height by maximum of 30% compared to the mechanically　jointed rodless cylinder, series MY1H. Furthermore, possible to replace　the cylinder for the drive unit while the workpiece is mounted.TypeSeriesActionBore size (mm)Cam follower guideMY2CDouble acting16，25，40Linear guideMY2HDouble acting16，25，40Linear guideMY2HTDouble acting16，25，40

・Improves dustproof and water resistance with a protective cover, and also 　prevents dust and water from entering from the side with a side seal. Type Series Action Bore size (mm) Slide bearing MY1MW Double acting 16，20，25，32，40，50，63 Cam follower guide MY1CW Double acting 16，20，25，32，40，50，63

・Four standard models are available.・A variety of applications are available based on the load mass and　required accuracy.＊Production of MY1BØ25, Ø32, Ø40, MY1HØ25, Ø32 and Ø40 　has been discontinued in April 2013.　Please select MY1B-Z and MY1H-Z.TypeSeriesActionBore size (mm)BasicMY1BDouble acting10，16，20，25，32，40，50，63，80，100Slide bearingMY1MDouble acting16，20，25，32，40，50，63Cam follower guideMY1CDouble acting16，20，25，32，40，50，63Linear guideMY1HDouble acting10，16，20，25，32，40Linear guideMY1HTDouble acting50，63

・Piping can be connected from 4 directions on the head cover.・Allows on-site piping to suit the installation conditions.・Easy adjustment of cushion needle　Adjustment is easier by changing the cushion needle adjustment　from side to top.・Auto switch can be mounted in any desired position. (D-M9□, D-A9□)・New dust seal band improves life.・The mounting and performance are the same as before, but the　weight is reduced.TypeSeriesActionBore size (mm)Linear guideMY1H-ZDouble acting25，32，40