Slider Type

e-Actuator Easy to Operate Integrated Controller: Slider Type EQFS□H /Rod Type EQY□H Easy to set up, just like air equipment! Two position stops with no programming required, Three positions stop with no programming required. 　Cycle time can be set in all control modes. Downsized with Integrated Controller, Wiring saving, Labor-saving · Programless · Reduced adjustment time Annual CO2 emissions are reduced by up to 59% through motor control optimization 5.8 kg-CO2e/year (14.1) ∗ The numerical values vary depending on the operating conditions.

High-Performance Electric Actuator LEFS□F Series Cycle time can be reduced. Cycle time: Reduced by 33% (0.62 s ← 0.93 s) compared with the existing model Acceleration/Deceleration: 9800 mm/s2 (327% increase compared with the existing model) Max. speed: 1500 mm/s (Improved by 25% compared with the existing model)

Electric Actuator / High Rigidity Slider Type Ball Screw Drive LEJS100-X400 Series  Motor output: Supports 750 W Work load (Speed: 500 mm/s, Lead: 10 mm), Horizontal: 400kg, Vertical: 80kg Speed (Stroke: 500 mm, Lead: 50 mm), Horizontal/Vertical: 2300 mm/s Max. acceleration/deceleration: 9800 mm/s2

Built-in Intermediate Supports Electric Actuator: High Rigidity Slider Type Ball Screw Drive LEJS63□-□M Built-in Intermediate Support A maximum speed of 1,800 mm/s1 has been achieved throughout the entire stroke! The use of intermediate supports results in reduced deflection of the ball screw when a long stroke is used. Max. stroke: 1,790 mm Horizontal work load: 85 kg (For the 10 mm lead) Positioning repeatability: ±0.01 mm (High-precision type)

・Various servo motors can be mounted due to the addition of the motorless type. ・Compatible Motors: 　Mitsubishi Electric Corporation, YASKAWA Electric Corporation, SANYO DENKI 　CO., LTD., OMRON Corporation, Panasonic Corporation, FANUC CORPORATION, 　FASTECH Co.,Ltd.、Rockwell Automation, Inc. (Allen-Bradley), 　Bechhoff Automation GmbH, Siemens AG, Delta Electronics, Inc. Spec. Model Stroke (mm) Work load (kg) Speed (mm/s) Screw lead (mm) Motorless Ball screw drive LEFS25 50 to 800 MAX.20 MAX.900 6, 12 Motorless Ball screw drive LEFS32 50 to 1000 MAX.45 MAX.1000 8, 16 Motorless Ball screw drive LEFS40 150 to 1200 MAX.60 MAX.1000 10, 20 Motorless Belt drive LEFB25 300 to 2000 5 MAX.2000 54 Motorless Belt drive LEFB32 300 to 2500 15 MAX.2000 54 Motorless Belt drive LEFB40 300 to 3000 25 MAX.2000 54

・Low-profile/Flat Height: 48 mm・Profile reduced by side mounting of motor　No interference with motor, even with large workpieces.・Auto switch mountable (Made to Order)・Max. stroke: 1000 mm・Transfer speed: 1000 mm/s・Positioning repeatability: ±0.1 mm・Compatible controllers: LECP6，LECP1，LECPMJSpec.ModelBearingStroke(mm)Work load(kg)Speed(mm/s)Step motor(Servo/24 VDC)LEL25MSlidingbearing100 to 10003Up to500Step motor(Servo/24 VDC)LEL25LBall bushingbearing100 to 10005Up to1000

・Low profile, low center of gravity 　Table height: 28 mm (in the case of LEMC/H/HT size 25) ・Can be combined with various guides ・High maintainability ・Motor mounting position: Above or below, right or left selectable ・Solid state auto switch can be mounted for limit confirmation and 　intermediate signal confirmation ・Selectable controllability (Controller) 　Complete control like an air cylinder (allows for 12 point intermediate stop) 　Easy position setting by value input ・Compatible controllers: LECP2, LECP6, LECP1 Guide type Model Stroke (mm) Work load (kg) Speed (mm/s) Equivalent lead (mm) Basic LEMB 100 to 2000 6，11 1000 48 Cam follower guide LEMC 100 to 2000 10，20 1000 48 Linear guide (Single axis) LEMH 100 to 1500 10，20 2000 48 Linear guide (Double axis) LEMHT 100 to 1500 10，20 2000 48

・Max. stroke: 3000 mm・Max. speed: 3000 mm/s・Max. acceleration/deceleration: 20000 mm/S2・Compatible drivers: LECSA，LECSB，LECSC，LECSS・Motorless specification available　Click here for detailsSpec. Model Stroke(mm) Work load (kg)Horizontal Speed(mm/s) Screw lead(mm) AC servo motor LEJB40 200 to 2000 MAX.20 MAX.2000 27 AC servo motor LEJB63 300 to 3000 MAX.30 MAX.3000 42

・Low-profile/low center of gravity: Height dimension reduced by　approx. 36% (Reduced by 32 mm)・Max. work load: 85 kg・Positioning repeatability: ±0.02 mm・Max. acceleration/deceleration: 20000 mm/S2・Clean specification: Complies with ISO Class 4 (Class 10) (11-LEFS)・Compatible controllers: LECSA，LECSB，LECSC，LECSS・Motorless specification available　Click here for detailsSpec. Model Stroke(mm) Work load (kg)Horizontal Speed(mm/s) Screw lead(mm) AC servo motor LEJS40 200 to 1200 MAX.55 MAX.1800 8，16，24 AC servo motor LEJS63 300 to 1500 MAX.85 MAX.1800 10，20，30

・A support guide is designed to support work pieces with significant 　overhang. ・Easy installation with the same outer dimensions as Series LEF body, 　contributes to reductions in man-hour for design and assembly ・Standardly equipped sealing band prevents the scattering of grease and 　entry of foreign matter from outside. Description Type Stroke (mm) Rated load (N) Basic dynamic load rating Rated load (N) Basic static load rating Ball screw drive LEFG16-S 50 to 500 6250 8350 Ball screw drive LEFG25-S 50 to 600 8950 13900 Ball screw drive LEFG32-S 50 to 800 16500 22000 Ball screw drive LEFG40-S 150 to 1000 22700 34500 Belt drive LEFG16-BT 300 to 1000 6250 8350 Belt drive LEFG25-BT 300 to 2000 8950 13900 Belt drive LEFG32-BT 300 to 2000 16500 22000 Belt drive LEFG25-BS 300 to 2000 6250 8350 Belt drive LEFG32-BS 300 to 2500 8950 13900 Belt drive LEFG40-BS 300 to 3000 16500 22000

Series LEFB Step Motor (Servo/24 VDC) Servo Motor (24 VDC) ・Max. stroke: 2000 mm ・Max. speed: 2000 mm/s ・Positioning repeatability: ±0.08 mm ・Compatible controllers: LECP6，LECA6，LECP1，LECPA，LECPMJ Series LEFB AC Servo Motor ・Max. speed: 2000mm/s ・Max. stroke: 3000mm ・Max. acceleration/deceleration: 20000mm/S2 ・Pulse input type ・With internal absolute encoder ・Positioning repeatability: ±0.06 mm ・Compatible drivers: LECSA, LECSB, LECSC, LECSS ・Motorless specification available　Click here for details Spec. Model Stroke (mm) Work load (kg) Horizontal Speed (mm/s) Screw lead (mm) Step motor (Servo/24 VDC) LEFB16 300 to 1000 1 48 to 1100 48 Step motor (Servo/24 VDC) LEFB25 300 to 2000 5 48 to 1400 48 Step motor (Servo/24 VDC) LEFB32 300 to 2000 14 48 to 1500 48 Servo motor (24 VDC) LEFB16A 300 to 1000 1 48 to 2000 48 Servo motor (24 VDC) LEFB25A 300 to 2000 2 48 to 2000 48 AC servo motor LEFB25S 300 to 2000 5 MAX. 2000 54 AC servo motor LEFB32S 300 to 2500 15 MAX. 2000 54 AC servo motor LEFB40S 300 to 3000 25 MAX. 2000 54

Series LEFS Step Motor (Servo/24 VDC) Servo Motor (24 VDC)・Max. work load: 60 kg・Positioning repeatability: ±0.02 mm・Clean specification: Complies with ISO Class 4 (ISO14644-1) (11-LEFS)・Compatible controllers: LECP6，LECA6，LECP1，LECPA，LECPMJSeries LEFS AC Servo Motor・High output motor (100/200/400 W)・Improved high speed transfer ability・High acceleration/deceleration （20000mm/S2）・Pulse input type・With internal absolute encoder・Positioning repeatability: ±0.02 mm・Clean specification: Complies with ISO Class 4 (ISO14644-1) (11-LEFS)・Compatible controllers: LECSA，LECSB，LECSC，LECSS・Motorless specification available　Click here for detailsSpec.ModelStroke(mm)Work load (kg)HorizontalVerticalSpeed (mm/s)Screw lead (mm)Step motor(Servo/24 VDC)LEFS1650 to 500MAX.10MAX.5005，10Step motor(Servo/24 VDC)LEFS2550 to 600MAX.20MAX.10006，12，20Step motor(Servo/24 VDC)LEFS3250 to 800MAX.45MAX.12008，16，24Step motor(Servo/24 VDC)LEFS40150 to 1000MAX.60MAX.120010，20，30Servo motor(24 VDC)LEFS16A50 to 500MAX.10MAX.5005，10Servo motor(24 VDC)LEFS25A50 to 600MAX.18MAX.8006，12，20AC servo motor(100/200/400 W)LEFS25S50 to 600MAX.20MAX.15006，12，20AC servo motor(100/200/400 W)LEFS32S50 to 800MAX.45MAX.15008，16，24AC servo motor(100/200/400 W)LEFS40S150 to 1000MAX.60MAX.150010，20，30