Training Courses

Training in Pneumatics

Course
Course Content
Duration
Course Fees
P1 Basic Pneumatics
  • Properties of compressed air and its area of application.
  • Basic pneumatic system and compressed air theory.
  • Description of different types of pneumatic compressor and their efficiencies.
  • Compressed air production, purification and distribution.
  • Explanation of different air filtering, regulation, and lubrication techniques.
  • Construction and principle of operation of actuators and Directional Control Valves.
  • Familiarization with pneumatic symbols-ISO 1219/5599
3 Days
Rs 5000 + 18% GST
 
P2 Advance Pneumatics
  • Common wearing of parts in pneumatic components.
  • Preventive maintenance of pneumatic systems.
  • Design of controls ( Logic , Memory, Time & Pressure dependent, Intermediate position, etc.)
  • Reading of complex circuit with step diagram.
  • Signal overlapping and methods of signal cut-off.
  • Sequential design with supplementary conditions.
  • Systematic fault findings in complex pneumatic control system and correction.
  • P1 is mandatory for P2
4 Days
Rs 7500 + 18% GST
 
EP1 Basic Electro-Pneumatics
  • Economical and technical aspects of Electro-Pnuematic Systems.
  • Basic electric theory.
  • Construction and pricipal of operation of Electro-Pneumatic Components.
  • Electrical Symbols DIN and ladder diagram.
  • Reading/designing and control schematics.
  • Safety Requirement.
3 Days
Rs 5000 + 18% GST
 
EP2 Advance Electro-Pneumatics
  • Control systems.
  • Various control circuits.
  • Introduction to sequence control.
  • Sequence control with opposing signal.
  • Sequence control with supplementary conditions.
  • Special  Circuits for Industrial applications.
  • Electrical Safety.
  • P1 & EP1 are mandatory for EP2
4 Days
Rs 7500 + 18% GST
 
V1 Vacuum Technology
  • System of pressure, units of measure & vacuum generation.
  • Vacuum systems, Glossary of low Vacuum Terms.
  • Selection of  vacuum pads & vacuum ejectors.
  • Peripheral vacuum components.
  • Exercises & practical on vacuum generation and setting of vacuum switches.
1 Day
Rs 2500 + 18% GST
 
I4.0 Industry 4.0*
  • Introduction to Industry 4.0.
  • History, concept, challenges, & its implementation.
  • Building blocks of Industry 4.0
  • Overview of core technologies involved in Industry 4.0.
  • Introduction to SMC's Industry 4.0 trainer module (SIF-400) .
  • Practical exercises on SIF-400 system.
  • *Basic knowledge of automation technology with good analytical skills .
3 Days
Rs 9000 + 18% GST

Pneumatics Basics

Training Modules

Training Schedule

Submitted by root on Wed, 04/08/2015 - 10:33